Adding a local analog module – Rockwell Automation 5720 DriveLogix System User Manual
Page 24
Advertising
![background image](/manuals/577021/24/background.png)
Publication 20D-UM002C-EN-P - November 2003
1-12 Getting Started
Adding a local analog module
Configure
3
1.
Create a new module.
2.
Select an output module to add.
Select a catalog number.
For this quick start example, select
Click OK.
continued
A.
Place the cursor over the local DIN rail (FlexBus Local)
B.
Click the right mouse button and select New Module.
Advertising
This manual is related to the following products: