Rockwell Automation 5720 DriveLogix System User Manual
Page 72
Advertising
![background image](/manuals/577021/72/background.png)
Publication 20D-UM002C-EN-P - November 2003
3-14 Placing and Configuring the Drive
To inhibit a module from logic, you must first read the Mode attribute for the
module using a GSV instruction. Set bit 2 to the inhibit status (1 to inhibit or 0
to uninhibit). Use a SSV instruction to write the Mode attribute back to the
module. For example:
Advertising
This manual is related to the following products: