Rockwell Automation 5720 DriveLogix System - Manual (Page 212)

Publication 20D-UM002C-EN-P - November 2003
10-2 Communicating with Devices on a DH-485 Link
page C-1 to understand how to gain access to the front of the DriveLogix
controller.
Connect the serial port of the DriveLogix controller to either port 1 or port 2
of the 1761-NET-AIC converter. Use the RS-485 port to connect the
converter to the DH-485 network.
The cable you use to connect the controller depends on the port you use on
the 1761-NET-AIC converter.
port 1: DB-9 RS-232, DTE
baud rate selector switch
port 2: mini-DIN 8 RS-232
dc power source selector switch
terminals for external 24V dc power supply
RS-485 port
If you connect to this port: Use this cable:
port 1
DB-9 RS-232, DTE connection
1747-CP3
or
1761-CBL-AC00
port 2
mini-DIN 8 RS-232 connection
1761-CBL-AP00
or
1761-CBL-PM02