Rockwell Automation 5720 DriveLogix System - Manual (Page 160)

Publication 20D-UM002C-EN-P - November 2003
7-14 Communicating with Devices on a ControlNet Link
DriveLogix writes
to PLC-2 In the DriveLogix controller, select one of these data
types:
SINT, INT, DINT, or REAL
Example source element: array_1
Use the PLC-2 compatibility file.
Example destination tag: 010
DriveLogix reads
from PLC-5 or
SLC Specify the destination file type based on the destination
device:
PLC-5 typed read: S, B, N, or F
PLC-5 word-range read: S, B, N, F, I, O, A, or D
SLC: B or N
Example source element: N7:10
In the DriveLogix controller, specify the destination data
type based on the destination device:
PLC-5: SINT, INT, DINT, or REAL
SLC: INT
Example destination tag: array_1
DriveLogix reads
from PLC-2 Use the PLC-2 compatibility file.
Example source element: 010
In the DriveLogix controller, select one of these data
types:
SINT, INT, DINT, or REAL
Example destination tag: array_1
Type of MSG
Instruction: Supported Source File Types: Supported Destination File Types: