Adding a local output module – Rockwell Automation 5720 DriveLogix System User Manual
Page 22
Advertising
![background image](/manuals/577021/22/background.png)
Publication 20D-UM002C-EN-P - November 2003
1-10 Getting Started
Adding a local output module
Configure
3
1.
Create a new module.
2.
Select an output module to add.
Select a catalog number.
Click OK.
continued
A.
Place the cursor over the local DIN rail (FlexBus Local)
B.
Click the right mouse button and select New Module.
Advertising
This manual is related to the following products: