Rockwell Automation 5720 DriveLogix System - Manual (Page 185)

Publication 20D-UM002C-EN-P - November 2003
Communicating with Devices on a DeviceNet Link 8-5
Placing DeviceNet Devices Use RSNetWorx for DeviceNet to configure a scan list for the 1788-DNBO
card. The scanlist and the associated input/output data tables set up the data
you want the controller to send to and receive from the card.
1. In RSNetWorx software, go online, enable edits, and survey the network.
2. Double-click the 1788-DNBO card and use the Module tab to configure the card. Upload the network information when prompted.
3. Use the ScanList tab to define the scanning order of the DeviceNet devices.