Rockwell Automation 5720 DriveLogix System - Manual (Page 19)

Publication 20D-UM002C-EN-P - November 2003
Getting Started 1-7
Configuring the host PowerFlex 700S Drive (continued)
You should enter a name.
Click Next
Click on Finish to apply and save the changes.
Describe the module (optional).
Select the communication format.
Select the minor revision and
Specify electronic keying.
Configure
2
Choose the correct drive rating from the
pull-down menu
TIP
If no drive ratings appear, download and install DriveExecutive™ Database files from:
http://www.ab.com/drives/data.html
3. Identify the drive module.
4. Use the Create wizard to configure the drive module. Use default values for this example.
If you do not want to go through each screen in the Create wizard, click Finish
Click Next
Click Next