Rockwell Automation 5720 DriveLogix System User Manual
Page 201
Advertising
Publication 20D-UM002C-EN-P - November 2003
Communicating with Devices on a Serial Link 9-7
Step 3: Configure the communication driver
Use RSLinx software to configure the serial communication driver. Select the
“DF1” driver.
2. Specify a name for the driver
1. In RSLinx software, select Communication
→ Configure Driver. From the Available Driver Types list, select”RS-232 DF1 Devices“.
3. Specify the appropriate communication settings.
Click OK.
Click Add New.
Click OK.
Advertising
This manual is related to the following products: