Downloading a project – Rockwell Automation 5720 DriveLogix System User Manual
Page 32
Publication 20D-UM002C-EN-P - November 2003
1-20 Getting Started
Downloading a project
Download
a project
6
1.
Make a serial connection from the workstation to the controller.
2.
Configure an RSLinx communication driver:
A.
In RSLinx software, select Communication
→ Configure Driver.
B.
From the Available Driver Types list, select “RS-232 DF1 Devices”
and click Add New.
C.
Select the “Logix5550/CompactLogix serial port” and specify the
COM port. Click Autoconfigure to have the software determine the
remaining serial settings.
4.
Place the controller in Remote Run mode.
A.
In RSLogix 5000 software, select Communication
→ “Who Active”.
B.
Expand the DF1 network and select your controller.
C.
Click Download. Confirm the download when prompted.
3.
Download the project from the Communications menu: