Rockwell Automation 2711E-xxxx PanelView Operator Terminals User Manual - Manual (Page 105)

5–30 Configuring PanelView Operator Terminals
Publication 2711E-821 – January 1998
To format the Date:
1. Press the Date tab to open the Date screen.
For PanelView keypad terminals, the following Time and Date
screen is shown.
For PanelView touch screen terminals, the following Time and Date
screen is shown.
2. Make your selections for Order, Year Format, and Leading Digit,
shown on the left of the window. The defaults are MDY for
Order, 2 Digits for Year Format, and Zero for Leading Digit.