Rockwell Automation 2711E-xxxx PanelView Operator Terminals User Manual - Manual (Page 25)

1–12 Introducing the PanelView Terminals
Publication 2711E-821 – January 1998
•
The 1400e terminal is available in four models:
– color touch screen stud mount (2711E-T14C6)
– color keypad stud mount (2711E-K14C6)
– color touch screen stud mount with ControlNet support
(2711E-T14C7, 2711E-T14C15)
– color keypad stud mount with ControlNet support
(2711E-K14C7, 2711E-K14C15)
•
The front panels of the PanelView 1000e, 1200e, and 1400e
terminals have new graphics.
•
The PanelView 1000e and 1400e terminals have analog touch
screens.
•
The PanelView 1400e terminal has an analog touch screen with
built-in, anti-glare glass.
•
The PanelView 1000e terminals run firmware versions 3 and
above only. The PanelView 1200e and 1400e terminals run
firmware versions 1 and above. The application you run on
PanelView 1000e, 1200e, and 1400e terminals is displayed in a
pixel graphics format, rather than a character-based format.
•
The logic board has a communication slot for communication
options, such as ControlNet.
!
ATTENTION: The Keyboard port is not currently
supported by the PanelView Firmware. Connecting a
keyboard could produce unpredictable results, and
could reset the terminal.
Table 1.D outlines the main changes that have been made to the
memory configuration on the terminal’s logic board.