Rockwell Automation 2711E-xxxx PanelView Operator Terminals User Manual - Manual (Page 78)

5–3 Configuring PanelView Operator Terminals
Publication 2711E-821 – January 1998
With the Mode Select Keyswitch set to Configure mode, the 1000e,
1200e, and 1400e terminals display a Terminal Configuration screen.
For 1000e, 1200e, and 1400e Keypad terminals, the screen includes
function key labels. For 1000e, 1200e, and 1400e Touch Screen
terminals, the screen excludes function key labels .
The example shown below is for 1000e and 1400e Keypad terminals.
The example shown below is for the 1200e Keypad terminal. The
screen includes the Align Screen function.
The Run Mode button is disabled in the first screen example and is
enabled in the second screen example.
To enable or disable Run Mode, press the Security button and select
the Mode Switch tab. Set the Software Mode Switch to Enable or
Disable. For more details, see Mode Switch in this chapter.
The Configuration Mode
Menu