Rockwell Automation 2711E-xxxx PanelView Operator Terminals User Manual - Manual (Page 186)

Index I–7
Publication 2711E-821 – January 1998
front panel design, A–3
fuses, A–7
humidity, A–9
keypad terminal weights, A–3
keypad terminals, A–3
Low Voltage Directive, A–2
memory, A–7
NEMA Standards, A–1, A–2
PCMCIA memory cards, A–6
PLC Remote I/O communications, A–5
RAM tests, A–7
RS-232 port, A–6
safety standards approvals, A–1
serial communications port, A–6
shock and vibration, A–9
storage temperature limits, A–9
temperature, A–9
terminal weights, A–3
time and date clock, A–8
touch screen terminal weights, A–3
touch screen terminals, A–4
user memory, A–7
1200e operator terminals
altitude, B–8
ambient operating temperature limits,
B–8
batteries, B–7
character sets, B–6
color units, B–3
CRT display, B–3
custom legends, B–2
Data Highway Plus Communications,
B–4
EMC standards, B–1
environmental standards, B–1
front panel design, B–2
fuses, B–6
heat generation, B–8
humidity, B–8
keypad terminal weights, B–2
keypad terminals, B–2
memory, B–6
NEMA Standards, B–1
PCMCIA memory cards, B–5
PLC Remote I/O communications, B–4
RAM tests, B–6
RS-232 port, B–5
safety standards approvals, B–1
serial communications port, B–5
shock and vibration, B–9
storage temperature limits, B–8
temperature, B–8
terminal weights, B–2
time and date clock, B–7
touch screen terminal weights, B–2
touch screen terminals, B–3
user memory, B–6
1400e operator terminals
alarm relay, C–8
altitude, C–9
ambient operating temperature limits,
C–9
batteries, C–8
character sets, C–7
color units, C–4
CRT display, C–4
custom legends, C–3
design standards, C–2
EMC Directive, C–2
EMC standards, C–1
environmental standards, C–1
front panel design, C–3
fuses, C–7
heat generation, C–9
humidity, C–9
keypad terminal weights, C–3
keypad terminals, C–3
Low Voltage Directive, C–2
memory, C–7
NEMA Standards, C–1, C–2
PCMCIA memory cards, C–6
PLC Remote I/O communications, C–5
RAM tests, C–7
RS-232 port, C–6
safety standards approvals, C–1
serial communications port, C–6
shock and vibration, C–10
storage temperature limits, C–9
temperature, C–9
terminal weights, C–3
time and date clock, C–8
touch screen terminal weights, C–3
touch screen terminals, C–4
user memory, C–7
Start-up options
DH+, 5–24
RIO, 5–24
Starting Serial Firmware Upgrade Utility
from Windows, D–7
from Windows 95, D–7
from Windows NT, D–7
Starting up, PanelView terminals in
configuration mode, 5–2
Station address, 5–22, 5–23
Station number, 5–47
Storage temperature limits
1000e operator terminals, A–9
1200e operator terminals, B–8
1400e operator terminals, C–9
Stuck cell timeout, 5–35