Rockwell Automation 2711E-xxxx PanelView Operator Terminals User Manual - Manual (Page 119)

5–44 Configuring PanelView Operator Terminals
Publication 2711E-821 – January 1998
The Touch Cell test lets you test 119 touch cells to identify those
that are difficult to activate or inoperable. The 120th cell is
occupied by the OK button, which exits the screen.
Test each touch cell by pressing it. A number will appear on each
button you press displaying the number of times you have pressed
it. If the number of times you press the button equals the number
which appears in that button, the touch cell is working. If you
find any buttons inoperable or difficult to activate, or if the
number displayed is not equal to the number of presses, contact
your Allen-Bradley Sales Representative.
•
Function Keys
ĊOn a keypad terminal, when you press the
Function Keys (F4) button from the Terminal Diagnostics screen,
the following screen is displayed.
Test each key by pressing it. If the key is working, the
corresponding key will appear to be pressed on the screen. F21 is
the exit button. If you find any keys difficult to activate or
inoperable, contact your Allen-Bradley Sales Representative.