Rockwell Automation 2711E-xxxx PanelView Operator Terminals User Manual - Manual (Page 114)

5–39 Configuring PanelView Operator Terminals
Publication 2711E-821 – January 1998
To align the 1200e screen:
" Press the Align Screen button to display the following screen.
Note: Pressing the Center Screen button on either the keypad or
touch screen terminal sets the screen alignment to its default center
position.
Aligning o n a Keypad Terminal
To set the screen alignment on a keypad terminal:
1. Press the four arrow keys to center your screen. There are nine
vertical steps (including the home location) and five horizontal.
When you’ve moved as far as you can go, the key turns gray
(disabled).
2. Press OK to save your adjustments.
Aligning on a Touch Screen Terminal
Alignment is particularly important with touch screen displays,
especially if the display will be viewed at an angle.
To set the screen alignment on a touch screen terminal:
1. Use the Test Alignment button to line up the on-screen buttons
with the touch cell borders.
2. Press the four corners of the Test Alignment button to see if it is
correctly aligned.
3. Press the arrow keys to center or align the screen.
"