Rockwell Automation 2711E-xxxx PanelView Operator Terminals User Manual - Manual (Page 147)

Specifications: 1000e Operator Terminal A–4
Publication 2711E-821 – January 1998
Touch Screen Terminals
Membrane: clear, hard-coated, scratch-resistant
polyester, over chemically
strengthened glass
Bezel: reinforced plastic
Touch cell actuation force: from 2.5 to 3.5 oz (71 to 100 grams)
Touch Cell Format
•
User can configure to any size touch cell
•
Minimum 40 x 40 pixel touch cell
•
Maximum number of touch cells is 192 (16x12)
Touch cells are rated for 1,000,000 presses.
The following table provides display specifications.
Display Format 640 horizontal by 480 vertical pixels
Display Intensity Low to high range adjustment using the firmware to
control the intensity level.
Screen Saver Timeout User-configurable, 0–60 minute timeout. 0 disables
the screen saver.
Screen Saver Display Intensity Low to high range adjustment using the firmware to
control the intensity level. The screen saver can be
switched off.
Display Size 10.4-inch diagonal TFT Active Matrix Display,
211.2 mm x 158.4 mm image size
Backlight Life
The PanelView 1000e terminal has a replaceable backlight. The
backlight has an expected minimum life of 10000 hours at maximum
brightness. This life can be significantly extended by reducing the
brightness level and using the screen saver.
Color Unit Display Attributes
There are 256 fixed colors for screen objects.
Flat Panel Display