Rockwell Automation 2711E-xxxx PanelView Operator Terminals User Manual - Manual (Page 94)

5–19 Configuring PanelView Operator Terminals
Publication 2711E-821 – January 1998
Press the Select Application button on the Terminal Configuration
screen to display the Select Application screen.
The current application name and location on the terminal are shown
in the Current Application status line. The application files in the
terminal in that location are displayed in the scrolling select list. To
list application files in other locations, press the Select Source
button.
To make a file the Current Application:
1. Press the Select Source button for the application file you want to
make current.
2. From the select list, use the Up and Down arrows to highlight the
file you want to make current. A description of the file is
displayed as you scroll through the list.
3. Press Select Application to make this file the current application.
4. Press OK to save changes. The new file is now the current
application and is the one used when you switch to Run mode.