Rockwell Automation 2711E-xxxx PanelView Operator Terminals User Manual - Manual (Page 96)

5–21 Configuring PanelView Operator Terminals
Publication 2711E-821 – January 1998
For PanelView touch screen terminals, the following Terminal
Network Setup screen is shown.
The Rack Number, Module Groups, Last Chassis (Yes or No), and
Access (Full or Listen Only) values are displayed. You can scroll
through the entries in this window using the Prev (Previous) and
Next buttons.
To display Block Transfer assignments for Remote I/O:
" Press the Block Transfer Files button.
Your PLC Type, baud rate, Block Transfer File number, Rack
number, Word, High/Low Byte, File Size, Usage, and Access (Full
or Listen Only) values are displayed. Use the Prev and Next buttons
to scroll through the entries in this window.