Aligning the 1200e screen – Rockwell Automation 2711E-xxxx PanelView Operator Terminals User Manual User Manual
Page 113
Advertising
![background image](/manuals/580602/113/background.png)
5–38
Configuring PanelView Operator Terminals
Publication 2711E-821 – January 1998
Terminal Display Intensity (1000e only)
The Display Intensity tab in the Terminal Response screen allows
you to adjust the brightness of the terminal display.
To set the Terminal Display intensity:
1. Press the Display Intensity tab in the Terminal Response screen.
The following screen is displayed.
2. Use the Backlight Intensity Level to cycle through the display
intensity levels from 50% to 100%. The default is set at the
maximum intensity level, which is 100%.
You can adjust the screen alignment on the 1200e terminals.
Note: There is no user-adjustable alignment or adjustment for the
1000e or 1400e terminal.
Aligning the 1200e Screen
"
Advertising