Rockwell Automation 2711E-xxxx PanelView Operator Terminals User Manual - Manual (Page 90)

5–15 Configuring PanelView Operator Terminals
Publication 2711E-821 – January 1998
When you set the Address Source to RIO Pass-Through and choose
OK, the terminal validates the Address Source and saves the
Auto-Restart settings. The terminal also de-selects the current
application file to ensure that the new manual Pass-Through rack
assignment does not conflict with existing application file rack
assignments.
Now when you switch to Run mode, the File Transfer screen is
displayed automatically.
PLC Controllers Required for Pass-Through
Important: Only specific series and revisions of PLC and SLC can
do Pass-Through downloads and uploads. The
following table lists applicable PLCs and SLCs.
Processor Series Revision Valid PLC Racks Baud Rates
SLC-5/04 (requires SLC 5/04
with OS 4.01 and the 1747-SN
Series B Scanner) All All 3 octal 57.6 kbps
115.2 kbps
230.4 kbps
PLC-5/11 All All 3 octal 57.6 kbps
115.2 kbps
230.4 kbps
PLC-5/15 B N or later 1–3 octal 57.6 kbps
PLC-5/20 All All 1–3 octal 57.6 kbps
115.2 kbps
230.4 kbps
PLC-5/20C
PLC-5/20C 1.5 All All 1–3 octal 57.6 kbps
115.2 kbps
230.4 kbps
PLC-5/20E All All 1–3 octal 57.6 kbps
115.2 kbps
230.4 kbps
PLC-5/25 A J or later 1–7 octal 57.6 kbps
PLC-5/30 A B or later 1–7 octal 57.6 kbps
115.2 kbps
230.4 kbps
PLC-5/40 A
B E or later
B or later 1–17 octal 57.6 kbps
115.2 kbps
230.4 kbps
PLC–5/40C
PLC-5/40C 1.5 All All 1–17 octal 57.6 kbps
115.2 kbps
230.4 kbps
PLC-5/40E All All 1–17 octal 57.6 kbps
115.2 kbps
230.4 kbps
PLC-5/60 A
B E or later
B or later 1–27 octal 57.6 kbps
115.2 kbps
230.4 kbps