Rockwell Automation 2711E-xxxx PanelView Operator Terminals User Manual - Manual (Page 24)

1–11 Introducing the PanelView Terminals
Publication 2711E-821 – January 1998
!
ATTENTION: In the unlikely event that two or more
touches occur simultaneously in the same horizontal or
vertical line, an input object located half-way between
the two touches could be activated. This is inherent in
the analog-resistive touch screen technology that is
used in PanelView 1000e and 1400e terminals.
PanelBuilder 1400e Configuration Software
PanelBuilder 1400e Configuration Software for Windows is an
easy-to-learn tool for developing complex applications quickly and
efficiently. You run PanelBuilder 1400e Configuration Software on a
personal computer to develop operator interface applications for
PanelView 1000e, 1200e, or 1400e operator terminals.
The Windows platform offers many advantages. In addition to a
superior graphical interface, you can work within several
applications at once and transfer information between them easily.
Figures 1.1 and 1.2 show the front view of the PanelView 1000e,
1200e, and 1400e terminals. The back of each terminal is shown in
the installation chapter for each terminal type.
The PanelView 1000e, 1200e, and 1400e terminals differ from the
PanelView 1200 terminal as follows:
•
Remote I/O, DH+, and ControlNet connectivity are now available
(used one at a time).
•
The PanelView 1000e terminal is available in four models:
– color touch screen clip mount (2711E-T10C6)
– color keypad clip mount (2711E-K10C6)
– color touch screen clip mount with ControlNet support
(2711E-T10C7, 2711E-T10C15)
– color keypad clip mount with ControlNet support
(2711E-K10C7, 2711E-K10C15)
•
The PanelView 1200e terminal is available in four models:
– color touch screen clip mount (2711E-T12C6)
– color touch screen stud mount (2711E-T12C4)
– color keypad stud mount (2711E-K12C6)
– color keypad stainless steel stud mount (2711E-K12C6L2)
Features of the PanelView
Terminals