Restoring defaults – Rockwell Automation 2711E-xxxx PanelView Operator Terminals User Manual User Manual
Page 121
Advertising
5–46
Configuring PanelView Operator Terminals
Publication 2711E-821 – January 1998
For PanelView 1200e/1400e terminals, Hours Logged tracks the
number of hours of operation for the terminal (see figure below).
This information allows you to track the total power-on time.
To open the Restore Defaults screen:
"
Press the Restore Defaults button on the Terminal Configuration
screen.
For PanelView keypad terminals, the following Restore Defaults
screen is shown.
Restoring Defaults
Advertising