Rockwell Automation 2711E-xxxx PanelView Operator Terminals User Manual - Manual (Page 110)

5–35 Configuring PanelView Operator Terminals
Publication 2711E-821 – January 1998
Stuck Cell Timeout
To open the Stuck Cell tab:
" Press the Stuck Cell tab in the Terminal Response screen.
For PanelView 1000e terminals, the following screen is displayed.
For enhanced PanelView 1200 (Series F and above), and PanelView
1200e, and 1400e terminals, the following screen is displayed.
You can set the length of time a touch cell or function key can be
pressed before the terminal determines the key or cell is stuck. When
the terminal determines that a key or cell is stuck, it displays a major
fault window with the following message:
Stuck button detected