Rockwell Automation 2711E-xxxx PanelView Operator Terminals User Manual User Manual
Page 120
5–45
Configuring PanelView Operator Terminals
Publication 2711E-821 – January 1998
Hours Logged
Select the Hours Logged tab to display screens for the PanelView
1000e or the 1200e/1400e terminals. The screen for Hours Logged
differs depending on the PanelView terminal you are using.
For PanelView 1000e terminals, Hours Logged tracks the number of
hours of operation for the terminal and the accumulated backlight
time. This information allows you to track the total power-on time
and to schedule backlight replacement. For information on backlight
replacement, see Chapter 7, Maintaining PanelView Terminals.
You only reset the hours for the backlight time after you change the
backlight.
To reset the hours for the backlight time:
"
Press the Reset Accumulated Backlight Time button or the F1
function key. A confirmation message is displayed, as shown in
the following example.