Rockwell Automation 2711E-xxxx PanelView Operator Terminals User Manual - Manual (Page 5)

Table of Contents toc–iii
Publication 2711E-821 – January 1998
Chapter 4
Overview 4–1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PanelView 1400e Terminal Dimensions 4–2 . . . . . . . . . . . . . . . . . . . . .
Tools for Installing Your PanelView 1400e Terminal 4–4 . . . . . . . . . . . . .
Mounting Options for PanelView 1400e Terminals 4–4 . . . . . . . . . . . . .
Mounting a Stud-Mount Keypad or Touch Screen Terminal in a
Panel or Wall Cutout 4–5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Mounting Your PanelView 1400e Terminal in a 19-inch Rack 4–6 . . . .
Mounting Your Keypad Terminal in a T30 Cutout 4–7 . . . . . . . . . . . . .
Setting Up the PanelView 1400e Terminal 4–7 . . . . . . . . . . . . . . . . . . .
Adjusting Contrast and Brightness 4–7 . . . . . . . . . . . . . . . . . . . . . . .
Adjusting Horizontal and Vertical Position 4–7 . . . . . . . . . . . . . . . . .
Switching Modes 4–8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connecting Power to the Terminal 4–8 . . . . . . . . . . . . . . . . . . . . . . .
Connecting the Upload/Download Cable 4–10 . . . . . . . . . . . . . . . . . .
Connecting the Serial Printer 4–10 . . . . . . . . . . . . . . . . . . . . . . . . . .
Connecting an External Alarm Relay 4–11 . . . . . . . . . . . . . . . . . . . . .
Connecting a Terminal to Your PLC System 4–12 . . . . . . . . . . . . . . . .
Chapter 5
Power-Up Functions 5–1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Power On Self-Test (POST) 5–1 . . . . . . . . . . . . . . . . . . . . . . . . . . .
Firmware Integrity Check 5–1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Battery Failure Test 5–2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Watchdog Test 5–2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Starting Up the Terminal in Configuration Mode 5–2 . . . . . . . . . . . . . . .
The Configuration Mode Menu 5–3 . . . . . . . . . . . . . . . . . . . . . . . . . . .
Transferring Application Files 5–4 . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Serial Application File Transfers 5–5 . . . . . . . . . . . . . . . . . . . . . . . .
Summary of Steps 5–5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Memory Card Transfers 5–9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Formatting the PCMCIA Card or the Onboard Flash
Memory (F5) 5–11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Erasing a Destination Partition (F4) 5–12 . . . . . . . . . . . . . . . . . . . . . .
Pass-Through Application File Transfers 5–13 . . . . . . . . . . . . . . . . . .
PLC Controllers Required for Pass-Through 5–15 . . . . . . . . . . . . . . . .
DH+ Direct/ControlNet Direct 5–16 . . . . . . . . . . . . . . . . . . . . . . . . . .
Selecting an Application 5–18 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Terminal Network Setup for Remote I/O Applications 5–20 . . . . . . . . . . .
Terminal Network Setup for DH+ Applications 5–22 . . . . . . . . . . . . . . . .
Terminal Network Setup for ControlNet Applications 5–23 . . . . . . . . . . . .
Application Startup 5–23 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Application Security 5–25 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Screen Security 5–26 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Mode Switch 5–27 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installing PanelView 1400e
Terminals
Configuring PanelView
Operator Terminals