Rockwell Automation 2711E-xxxx PanelView Operator Terminals User Manual User Manual
Page 108
Advertising
![background image](/manuals/580602/108/background.png)
5–33
Configuring PanelView Operator Terminals
Publication 2711E-821 – January 1998
Alarm Settings
The alarm relay can be wired to an external alarm or warning light.
You control the relay by configuring an alarm message to activate it,
or by defining a PLC Controlled Relay output bit (see your
PanelBuilder 1400e Configuration Software for Windows User
Manual for details).
You can set the number of alarm history records you want displayed
on your terminal. You can display 128, 500, 1000, or 1500 alarm
history records on your terminal.
To open the Alarm Settings screen:
"
Press the Alarm Settings tab in the Terminal Response screen.
For PanelView 1000e terminals, the following Alarm Settings screen
is displayed.
Advertising