Metrohm tiamo 2.2 Manual - Manual (Page 1007)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 5 Method
tiamo 2.2 ￭￭￭￭￭￭￭￭ 993
Window
A range (window) can be defined on the measured value axis or on the time
axis. The break-point evaluation will only be carried out in the defined win-
dow. Only the first break-point in the defined window will be recognized.
Selection Measured value | Time | off
Default value off
Lower limit
Value for the lower limit of the window.
Time for the lower limit of the window.
Window = Measured value
Range
0 ... 4000 mAU
Default value 0 mAU
Window = Time
Range
0 ... 999999 s
Default value 0 s
Upper limit
Value for the upper limit of the window.
Time for the upper limit of the window.
Window = Measured value
Range
0 ... 4000 mAU
Default value 4000 mAU
Window = Time
Range
0 ... 999999 s
Default value 999999 s
5.6.4.14.5 MEAS Opt - Fix endpoint evaluation
Dialog window: Method ▶ MEAS Opt ▶ Properties... ▶ Evaluations ▶ Fix endpoint
evaluation #
Quantity
Selection of the fixed measured quantity to which the associated values for
the other quantities are to be interpolated from the list of measured points.
Selection Measured value | Time
Default value Measured value
Fix value
Value of the fix endpoint.