Metrohm tiamo 2.2 Manual - Manual (Page 1484)

8.4 Manual Control - Functions ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1470 ￭￭￭￭￭￭￭￭ tiamo 2.2
Rack code
Shows the number of positions on the rack attached. If no rack is attached,
-------- is displayed.
Number of positions
Shows the number of positions on the rack attached. If no rack is attached,
-------- is displayed.
Shift rate
Shift rate for manual control of the sample changer.
Range 5 ... 20 °/s
Default value 20 °/s
Lift rate
Lift rate for manual control on the selected tower.
730, 778, 789, 814, 815, 855, 864
Range
5 ... 25 mm/s
Default value 25 mm/s
774, 874
Range
3 ... 12 mm/s
Default value 12 mm/s
Swing rate
Swing rate for manual control of the Swing Head on the sample changer.
Range 10 ... 55 °/s
Default value 20 °/s
[Initialize rack]
The rack in position is initialized.
Note
When initializing the rack, the following actions are carried out:
– Move rack in position to read out rack code.
– Transfer rack data for the rack code to sample changer.
– Move lifts upwards to 0 mm
– Move robotic arm back.