Metrohm tiamo 2.2 Manual - Manual (Page 190)

3.8 Subwindow Live display ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
176 ￭￭￭￭￭￭￭￭ tiamo 2.2
STAT
Selection
Time | Measured value | Temperature | Volume
| dV/dt | Calculated 1…3 | External 1…3
Default value Time
MEAS
Selection
Time | Measured value | Temperature | dMW/
dt | Calculated 1…3 | External 1…3
Default value Time
MEAS T/Flow
Selection
Time | Measured value | Flow | Calculated 1…
3 | External 1…3
Default value Time
MEAS TC Cond
Selection
Temperature | Measured value | Time | Calcula-
ted 1…3 | External 1…3
Default value Temperature
MEAS Opt
Selection
Time | Measured value | Intensity | Transmis-
sion | Saturated pixels
Default value Time
DOS
Selection
Time | Measured value | Temperature | Volume
| dV/dt | Calculated 1…3 | External 1…3
Default value Time
TET
Selection
Volume | Measured value | dT/dV | ERC | Time |
Calculated 1…3 | External 1…3
Default value Volume
y1 axis
Selection of the quantity to be shown on the y1 axis (left y axis).
DET
Selection
Measured value | Volume | Time | Temperature
| ERC | Calculated 1…3 | External 1…3
Default value Measured value