Metrohm tiamo 2.2 Manual - Manual (Page 1548)

9.8 Sample tables ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1534 ￭￭￭￭￭￭￭￭ tiamo 2.2
9 Repeat step 6 for each desired determination.
10 Click on [Close].
The dialog window Edit line - Sample table 'New sample table'
is closed.
11 In the dialog window Sample table 'New sample table' click on the
menu item Sample table ▶ Save as....
The dialog window Save sample table opens.
12 In the field Name enter the desired name.
13 Click on [Save].
The sample table will be saved under the name that was entered.
9.8.2 Edit sample table
How to proceed?
1 Select program part Workplace.
2 Click on the symbol or the menu item Tools ▶ Sample
table ▶ Open….
The dialog window Open sample table opens.
3 Select desired sample table.
4 Click on [Open].
The dialog window with the selected sample table opens.
5 Click on the menu item Sample table ▶ Properties… in the dialog
window Sample table.
The dialog window Properties - Sample table opens.
6 Define the properties for the sample table.
7 Click on [OK].
8 Select the line to be modified in the dialog window Sample table.