Metrohm tiamo 2.2 Manual - Manual (Page 290)

4.4 Templates ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
276 ￭￭￭￭￭￭￭￭ tiamo 2.2
4.4.4.3.8 XML export - Device data
XML export
– <usedDevices dynamic=""> Device data
– <Device> Data on device.
<subtype val="" />
– <deviceType> Device type.
<vn val="" /> Parameter name.
<vr val="" /> Parameter value.
</deviceType>
– <deviceName> ... </device-
Name> Device name.
– <instrNo> ... </instrNo> Device serial number.
– <deviceProgNo> ... </device-
ProgNo> Device program number.
– <rackName> ... </rackName> Rack name.
– <rackCode> ... </rackCode> Rack code.
– <towerNoOne> ... </tower-
NoOne> Tower number.
– <swingHeadOneType> ... </
swingHeadOneType> Type of Swing Head on tower 1.
– <swingHeadOneSerial> ... </
swingHeadOneSerial> Serial number of the Swing Head on tower 1.
– <towerNoTwo> ... </tower-
NoTwo> Tower number.
– <swingHeadTwoType> ... </
swingHeadTwoType> Type of Swing Head on tower 2.
– <swingHeadTwoSerial> ... </
swingHeadTwoSerial> Serial number of the Swing Head on tower 2.
– <spectroData>
– <detectorType> ... </detector-
Type> Detector type of spectrometer.
– <dateRecDarkRefSpec> ... </
dateRecDarkRefSpec> Recording time of dark and reference spectrum.
– <userRecDarkRefSpec> ... </
userRecDarkRefSpec> User during recording of the dark and reference spectrum.