Metrohm tiamo 2.2 Manual - Manual (Page 1190)

5.6 Commands ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1176 ￭￭￭￭￭￭￭￭ tiamo 2.2
[abc] OR function for single charac-
ters receive a or b or c
[a-z0-9] one character in the specified
range m or 5
(hallo) substring string contains hallo
^hallo start of line hallo is at start of line
hallo$ end of line hallo is at end of line
. any single character a or 4 or - or …
\. point .
\d one digit 3
\d+ several digits 324567
\d{4} four digits 3143
\D not one digit A or ! or …
\w a digit or a letter a or 3
\W neither digit nor letter ! or .
.* any character string abcd or 41 or -$=$ or
…
Any combination of regular expressions is possible.
Note
Open and close brackets must be set in the field Comparison in any case
in order to save the received data in a variable. Therefore, to save a com-
plete character string in a variable, the expression (.*) must be entered in
the field Comparison.
5.6.9.7 WEIGH
5.6.9.7.1 WEIGH - Overview
Dialog window: Method ▶ WEIGH ▶ Properties... ▶ WEIGH - 'Command name'
Command for calling up the weight from a balance.
Appearance
The command has the following appearance: