Metrohm tiamo 2.2 Manual - Manual (Page 278)

4.4 Templates ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
264 ￭￭￭￭￭￭￭￭ tiamo 2.2
4.4.4.3.4 XML export - Results overview
XML export
– <Results dynamic=""> Results overview
– <data>
<subtype val="" />
<vr val="" /> Result value with the number of decimal places defined in
the CALC command.
<vf val="" /> Result value with full precision.
<vs val=""/> Result status:
OK = The value is ok and has not been monitored.
OKL = The value is ok and has been monitored.
LE = The value exceeded the limit and has not been moni-
tored.
LEL = The value exceeded the limit and has been moni-
tored..
NV = The value is invalid and has not been monitored.
NVL = The value is invalid and has been monitored.
<vt val=""/> Result type:
TX = Text
NR = Number
DT = Date/Time
NA = Unknown
<vn val=""/> Result name.
<pr val=""/> Name of the CALC command the result has been gener-
ated with.
<un val=""/> Unit of the result.
<fo val=""/> Formula used for the calculation of the result.
– <fv dynamic=""> Variables used for the calculation of the result.
– <data>
<vr val="" /> Variable value.
<vs val=""/> Variable status (see above).
<vt val=""/> Variable type (see above).
<vn val=""/> Variable name.