Metrohm tiamo 2.2 Manual - Manual (Page 1075)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 5 Method
tiamo 2.2 ￭￭￭￭￭￭￭￭ 1061
5.6.6.2 ADD
5.6.6.2.1 ADD - Overview
Dialog window: Method ▶ ADD ▶ Properties... ▶ ADD - 'Command name'
Command for dosing a defined volume of a solution with an exchange
or dosing unit.
Devices
This command can be executed with the following devices:
Titrando: 808, 809, 835, 836, 841, 842, 851, 852, 857, 859, 888, 890,
901, 902, 904, 905, 906, 907
Titrino: 702, 716, 718, 719, 720, 721, 736, 751, 758, 784, 785, 794, 795,
798, 799
Conductometer: 856
Dosing Interface: 846
pH/Ion - Meter: 867
Sample Processor: 730, 774, 778, 789, 814, 815, 864, 874
Robotic Titrosampler: 855
Appearance
The command has the following appearance:
Parameters
The parameters for the command ADD are configured on the following 2
tabs:
￭ General/Hardware
Parameters for devices, dosing devices and stirrers.
￭ Dosing parameters
Parameters for the dosing settings.
Command variables
The following command variables are generated in the method run by the
command ADD and can be used in formulas under the designation 'Com-
mand name.Variable designation':