Metrohm tiamo 2.2 Manual User Manual
Page 287
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4 Database
tiamo 2.2
￭￭￭￭￭￭￭￭
273
– <body dynamic="">
– <data>
<RowDesc> ... </RowDesc>
Measuring solution.
<dV> ... </dV>
Addition volume in mL.
<MeasVal> ... </MeasVal>
Measured value in mV.
<dU> ... </dU>
Measured value differential in mV.
<Dur> ... </Dur>
Duration of measurement in s.
</data>
</body>
</StdAddTable>
</StdAddData>
– <MeasPoints content-
Type="table">
Measuring points
– <tableHeader>
Column headers.
– <th>
<vr val="" />
Column header.
</th>
</tableHeader>
– <tableBody>
Measuring points.
– <td>
<vr val="" />
<vf val="" />
</td>
</tableBody>
</MeasPoints>
– <EndPoints dynamic="">
Endpoints
– <data>
<ept val="" />
Designation of the endpoint.
<epvx val="12.1835" />
X value of the endpoint.
<epux val="mL" />
Unit of the x value of the endpoint.
<epvy val="518.5" />
Y value of the endpoint.
<epuy val="mV" />
Unit of the y value of the endpoint.