Metrohm tiamo 2.2 Manual - Manual (Page 446)

5.6 Commands ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
432 ￭￭￭￭￭￭￭￭ tiamo 2.2
POP3 server
Address of POP3 mail server.
Input 200 characters
5.6.2.3 TRACK
Dialog window: Method ▶ TRACK ▶ Properties.. ▶ TRACK 'Command name'
Start command for normal track.
Appearance
The command has the following appearance:
Command name
Name of the command.
Input 25 characters
Live display
on | off (Default value: on)
If this option is enabled, then the track will be shown in the live display.
Return immediately
on | off (Default value: off)
If this option is enabled, then the program does not wait for this track to be
completed, but rather sends an acknowledgement immediately to the track
with the CALL command. From now on, both tracks will be running simul-
taneously.
Delete old data
on | off (Default value: off)
All data previously generated by a track will be deleted at each new start of
this track when this option is activated.
Command variables
The following command variables are generated in the method run by the
command TRACK and can be used in formulas under the designation
'Command name.Variable designation':