Metrohm tiamo 2.2 Manual - Manual (Page 1028)

5.6 Commands ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1014 ￭￭￭￭￭￭￭￭ tiamo 2.2
Number of additions
Number of times the standard solution is added.
Range 1 ... 19
Default value 3
Volume auxiliary solution
Volume of the auxiliary solution (e.g. buffer) which was added to the sample
before the first standard addition.
Range 0.0000 ... 9999.999 mL
Default value 0.0000 mL
Stop volume
Volume of auxiliary solution (e.g. buffer) that is to be added to the sample
before the first standard addition.
Range 0.0 ... 9999.9 mL
Default value 100.0 mL
Addition solution
Note
Displayed only for Solution = not defined.
Concentration
Concentration of addition solution.
Range 0.001 ... 999999.999
Default value 1.000
Device
Concentration unit of addition solution.
Selection mol/L | mmol/L | µmol/L | ppm | g/L | mg/L |
µg/L | mg/mL | µg/mL | % | mEq/L
Default value ppm
Control parameters
Dosing rate
Speed at which the volume increments are added.
Selection slow | medium | fast
Default value fast