Metrohm tiamo 2.2 Manual - Manual (Page 1458)

7.16 RS-232 device ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1444 ￭￭￭￭￭￭￭￭ tiamo 2.2
Selection COM1 | COM2 | … | COMn
Default value COMn
COMn
First free COM port.
Baud rate
Transmission rate. The baud rate selected here must also be set on the device
itself.
Selection 300 | 600 | 1200 | 2400 | 4800 | 9600 | 19200 |
38400 | 57600 | 115200
Default value 9600
Data bit
Number of data bits.
Selection 7 | 8
Default value 8
Parity
Type of parity testing.
Selection None | Odd | Even
Default value None
Stop bit
Number of stop bits.
Selection 1 | 2
Default value 1
Handshake
Type of data transmission protocol.
Selection None | HW | SW
Default value None
Max. waiting time
Maximum waiting time for receiving characters. If this time is exceeded,
receiving will be stopped.
Range 1000 ... 9999 ms
Default value 2000 ms
Terminator for send
Terminator for send in hexadecimal code.