Metrohm tiamo 2.2 Manual - Manual (Page 284)

4.4 Templates ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
270 ￭￭￭￭￭￭￭￭ tiamo 2.2
</Solution>
</exchDosUnit>
– <stirrerPortName> ... </stirrer-
PortName> Number of the MSB connector the Remote Box was con-
nected to.
– <stirrerType> ... </stirrerType> Type of stirrer.
– <serialStirrer> ... </serialStir-
rer> Stirrer serial number.
– <remotePortName> ... </remo-
tePortName> Number of the MSB connector the Remote Box was con-
nected to.
– <remoteType> ... </remote-
Type> Type of Remote Box.
</Port>
</devicePorts>
– <Sensor> Data on sensor.
<subtype val="" /> Type of sensor:
XML_SENSOR_OTHER = Other sensor
XML_SENSOR_PH = pH sensor
XML_SENSOR_ION = ISE sensor
XML_SENSOR_METAL = Metal sensor
XML_SENSOR_TEMP = Temperature sensor
XML_SENSOR_COND = Conductivity sensor
– <measInput> Data on measuring input.
<adcInputName val="" /> Number of measuring input.
<adcType val="" /> Type of analog/digital converter.
<adcSerial val="" /> Serial number of measuring input.
<tempSensorType val="" /> Type of temperature sensor (Pt 1000 or NTC).
<tempSensorValue25 val="" /> Nominal resistance of connected NTC sensor.
<tempSensorSlope val="" /> Material constant of the NTC resistance referred to meas-
uring the resistance at 25 °C and 50 °C.
</measInput>
– <sensorData> Data on sensor.
<sensorName val="" /> Sensor name.
<sensorType val="" /> Sensor type.