Metrohm tiamo 2.2 Manual - Manual (Page 193)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 3 Workplace
tiamo 2.2 ￭￭￭￭￭￭￭￭ 179
STAT
Selection
off | Measured value | Volume | Temperature |
Time | dV/dt | Calculated 1…3 | External 1…3
Default value off
MEAS
Selection
off | Measured value | Time | Temperature |
dMW/dt | Calculated 1…3 | External 1…3
Default value off
MEAS T/Flow
Selection
off | Measured value | Time | Flow | Calculated
1…3 | External 1…3
Default value off
MEAS TC Cond
Selection
off | Measured value | Time | Calculated 1…3 |
External 1…3
Default value off
MEAS Opt
Selection
off | Measured value | Time | Intensity | Trans-
mission | Saturated pixels
Default value off
DOS
Selection
off | Measured value | Volume | Temperature |
Time | dV/dt | Calculated 1…3 | External 1…3
Default value off
TET
Selection
off | Volume | Measured value | dT/dV | ERC |
Time | Calculated 1…3 | External 1…3
Default value off
Color
Selection of the curve color for the quantity to be shown on the y2 axis.
Selection Color selection | magenta
Default value magenta
Display measuring points
on | off (Default value: off)
If this option is enabled, then in addition to the curve the single measured
values are shown as crosses.