Metrohm tiamo 2.2 Manual - Manual (Page 388)

4.8 Subwindow curves ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
374 ￭￭￭￭￭￭￭￭ tiamo 2.2
Curve
Curve color
Selection of the color for the curve line.
Selection 13 colors | pink
Default value pink
Symbol
Selection of the symbol for the display of the individual measuring points.
Not editable for MEAS Ref and MEAS Spec commands
Selection
5 symbols | No symbol
Default value No symbol
No symbol
Measuring points are not shown.
Note
With curves, for which the distance between to measuring points is
smaller than 5 pixels, the separate measuring points are not displayed
anymore, even if a symbol has been selected. In this case, the graphics
window can eventually be enlarged in order to display the symbols again.
Symbol color
Selection of the color for the measuring point symbol.
Not editable for MEAS Ref and MEAS Spec commands
Selection
13 colors | pink
Default value pink
Smoothing
Smoothing
on | off (Default value: on)
Enables/disables the smoothing for curves.
Smoothing factor x axis
Factor for smoothing on the x axis.
Range 0.01 ... 1000
Default value 0.01