Metrohm tiamo 2.2 Manual - Manual (Page 1470)

7.18 Barcode reader ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1456 ￭￭￭￭￭￭￭￭ tiamo 2.2
Input 1000 characters
Monitoring of GLP validity
Monitoring of GLP validity
on | off (Default value: off)
If this option is switched on then the time interval for the GLP test will be
monitored.
Monitoring can only be switched on when a date has been entered in the
field GLP test date.
GLP test interval
Time interval to next GLP test. If a value is entered here then the date in the
field Next GLP test will be adapted automatically.
Only editable when the monitoring is activated.
Range
1 ... 999 Days
Default value 999 Days
Next GLP test
Date on which the next GLP test is to be carried out. The date can be selected
by clicking on the symbol in the dialog window Select date (see Chapter
2.5.1, page 83). After the date has been entered, the field GLP test inter-
val will be adapted automatically.
Only editable when the monitoring is activated.
Default value
GLP test date + 999 days
Message
The message options can only be edited if monitoring is switched on.
Message by E-mail
on | off (Default value: off)
The message is additionally sent to the e-mail address defined under [E-
mail] if this option is activated. The message is sent in text format.
[E-mail]
[E-Mail] opens the Send e-mail window (see Chapter 2.6.1, page 86).
Acoustic signal
on | off (Default value: off)
If this option is enabled, an acoustic signal will be emitted additionally to the
message defined above