Metrohm tiamo 2.2 Manual - Manual (Page 784)

5.6 Commands ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
770 ￭￭￭￭￭￭￭￭ tiamo 2.2
Titrando, 855
Range
-20.0 ... 150.0 °C
Default value 25.0 °C
Titrino
Range
-170.0 ... 500.0 °C
Default value 25.0 °C
Time interval measuring point
Time interval for entering a measuring point in the measuring point list.
Titrando
Range
0.1 ... 999999 s
Default value 2.0 s
Titrino
Range
0.08 ... 16200 s
Default value 2.00 s
5.6.3.5.3.6 KFT Upol - Stop conditions
Tab: Method ▶ KFT Upol ▶ Properties... ▶ Stop conditions
Command name
Name of the command.
Input 25 characters
Conditions for stopping the titration. If more than one stop condition is in
effect at the same time, then the criterion which is fulfilled first will stop the
titration.
Stop volume
Stops when the given volume has been added after the start of the titration
(including start conditions). The stop volume should be adapted to suit the
sample weight or the titration vessel size.
Titrando
Range
0.00000 ... 9999.99 mL
Default value 100,000 mL
Selection off
Titrino
Range
0.00 ... 9999.99 mL
Default value 100.00 mL
Selection off