Metrohm tiamo 2.2 Manual - Manual (Page 890)

5.6 Commands ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
876 ￭￭￭￭￭￭￭￭ tiamo 2.2
Note
If a start volume is to be added then it must be smaller than 1/2 V(EP1).
5.6.3.10.2 Minimum/Maximum evaluation
Parameters: Method ▶ DET/MET/SET/KFT/KFC/MEAS ▶ Properties... ▶ Additional
evaluations ▶ Minimum/Maximum evaluation
For the minimum or maximum measured value the associated volume,
time and temperature are interpolated from the measuring point list. The
evaluation begins as soon as the slope of the curve exceeds a particular
threshold value.