Metrohm tiamo 2.2 Manual - Manual (Page 1178)

5.6 Commands ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1164 ￭￭￭￭￭￭￭￭ tiamo 2.2
Note
Input lines that are of no interest or for which no defined condition can
be predicted should also be masked with an asterisk *.
Max. waiting time
on | off (Default value: off)
If this option is activated, then a maximum waiting time can be entered for
the input signal.
Range 0.0 ... 9999.9
Default value 10.0
Selection min | s
Default value min
Note
If the option Max. waiting time is not activated, it is being waited end-
lessly for the input signal.
5.6.9.4 SEND
5.6.9.4.1 SEND - Overview
Dialog window: Method ▶ SEND ▶ Properties... ▶ SEND - 'Command name'
Command for Sending event messages to commands, tracks or to
tiamo.
Appearance
The command has the following appearance:
Parameters
The parameters for the command SEND are configured in the following
dialog window:
￭ SEND - Properties