Labconco PURICARE Procedure Station Models 31260 - Manual (Page 140)

Product Service 1-800-522-7658 140
Section 5 – Reconfiguring the Unit for Operation
with a Canopy Connection
Note: After canopy installation, you MUST reconfigure the Logic+ to have a
canopy.
1. Press the Menu button.
2. Press the ▼ button until the Services option is highlighted
(it will turn yellow).
3. Press OK/Mute to enter the Services menu screen.
4. Press the ▼ button until the Configuration option is
highlighted (it will turn white).
5. Press OK/Mute to alter the configuration.
6. You will see a warning screen alerting you that you are
about to alter the BSC’s settings.
7. Press OK/Mute to input the password.
8. When requested for the password press Light , UV light ,
Timer , Timer then OK/Mute .
MAIN MENU
1. MyLogic TM
2. Settings
3. Service
  or to choose,
OK to select, MENU to escape
or to choose,
OK to select, MENU to return
Current Settings
Restore Default
Diagnostics
Calibration
 Configuration
 
Service
Configuration
PASSWORD:
ATTENTION!
The following screens are used
to alter the operation of the
Logic. They should only be used
by a qualified certifier as part
of the certification process.
Configuration
OK to proceed, MENU to return