Labconco PURICARE Procedure Station Models 31260 - Manual (Page 51)

Product Service 1-800-522-7658 51
Unpacking the Biosafety Cabinet
Carefully remove the outer carton and inspect the cabinet for damage that may have
occurred in transit. If the biosafety cabinet is damaged, notify the delivery carrier
immediately and retain the entire shipment intact for inspection by the carrier.
Note: United States Interstate Commerce Commission rules require that claims be filed
with the delivery carrier within fifteen (15) days of delivery.
Do not return goods without the prior authorization of Labconco. Unauthorized returns
will not be accepted.
If the cabinet was damaged in transit, you must file a claim directly with the freight
carrier. Labconco Corporation and its dealers are not responsible for shipping damages.
Do not discard the carton or packing material for the biosafety cabinet until all of the
components have been checked, installed and tested.
The cabinet is secured to the pallet in two places on each side. To access the nuts and
bolts, remove the side panels by removing and keeping the two Phillips screws on both
panels. Swing the front of each panel away from the cabinet, and lift it straight up to
remove the panel from the cabinet.
Note: The side panels must be removed to access the fasteners that secure the
biosafety cabinet to the pallet. DO NOT ATTEMPT TO LIFT THE BIOSAFETY
CABINET BY THE SIDE PANELS; DAMAGE WILL OCCUR.
Preparing the Biosafety Cabinet for
Operation
Installation instructions (Labconco P/N 1056801) are attached to the sash of the
biosafety cabinet. If these instructions are missing or unclear, contact Product Service at
800-821-5525 or 816-333-8811. The following are located in a box either taped to the
top of or underneath the work surface:
 User’s Manual CD
 Drain Valve Assembly and fasteners
 Power Cord
 Product Registration Card
 Vacu-Pass TM Accessories (optional)
If you did not receive one or more of the components listed for the cabinet, or if any of
the components are damaged, contact Labconco Corporation immediately for further
instructions.