Air filter element replacement, Air filter element replacement -33 – Hypertherm HPR800XD Auto Gas Rev.2 User Manual

Page 247

Advertising
background image

Maintenance

HPR800XD Auto Gas –

806500

5-33

Air filter element replacement

1. Turn OFF all electrical power and disconnect the air hose from the filter.

2. Remove the filter bowl by turning it counter clockwise until it releases.

3. Pull the clear filter housing down firmly to remove it. The filter housing has an O-ring around the top. Apply a thin film

of silicone lubricant on the O-ring to extend it’s life. The O-ring should look shiny, but there should not be any excess

or built-up grease.

4. Use a screwdriver to remove the filter element from the filter housing. Then install the new filter element.

Note: Do not allow the filter element to turn when loosening the screw.

Filter bowl

Clear filter housing

5. Reinstall the clear filter housing and the filter bowl.

Advertising
This manual is related to the following products:

HPR400XD Auto Gas Rev.4, HPR260XD Auto Gas Rev.3, HPR130XD Manual Gas Rev.3, HPR130XD Auto Gas Rev.3, HPR260XD Manual Gas Rev.3, HPR800XD Manual Gas Rev.2, HPR400XD Manual Gas Rev.4

Popular Brands
Popular manuals