Chiller interface coolant filter, Filter replacement, Chiller interface coolant filter -36 – Hypertherm HPR800XD Auto Gas Rev.2 User Manual

Page 250: Filter replacement -36

Text mode
Original mode

Advertising

Maintenance

5-36

HPR800XD Auto Gas –

806500

chiller interface coolant filter

Filter replacement

1. Turn OFF all power to the system.
2. Remove the filter housing.
3. Remove and discard the filter element.
4. Install the new filter element 027664.
5. Re-install the housing.
6. Refill the chiller with new coolant.

caution: coolant will flow from the filter when its housing is removed. Drain coolant

before servicing the filter.

Advertising

This manual is related to the following products:

HPR400XD Auto Gas Rev.4 HPR260XD Auto Gas Rev.3 HPR130XD Manual Gas Rev.3 HPR130XD Auto Gas Rev.3 HPR260XD Manual Gas Rev.3 HPR800XD Manual Gas Rev.2 HPR400XD Manual Gas Rev.4