Verilink WANsuite 6x30 (34-00315.B) Product Manual - Manual (Page 119)

V T 1 0 0 I n t e r f a c e 4-21
T im e E la p sed Total elapsed seconds in the current 15-minute interval.
E S Count of Errored Seconds on this endpoint since the unit was last restarted.
S E S Count of Severely Errored Seconds on this endpoint since the unit was last
restarted.
C R C Count of Cyclic Redundancy Check anomalies on this endpoint since the unit
was last restarted.
L O S W S Count of Loss of Sync Word Seconds on this endpoint since the xU was last
restarted.
U A S Count of Unavailable Seconds on this endpoint since the xU was last
restarted.
15-Minute and 1-Day Intervals
Also included on this screen are prompts that, when selected, display the span
endpoint performance summaries for 15-minute intervals and for 1-day
intervals. These screens display only a summary of the errors (ES, SES, CRC,
LOSWS, UAS) that have occurred on the span during the interval selected.
The 15-Minute Intervals table provides one row for each endpoint
performance data collection 15-minute interval. The 1-Day Intervals screen
provides one row for each endpoint performance data collection 24-hour
interval.
Serial Screen
The Serial screen (Figure 4.18) lets you view and make changes to the unit’s
Serial interface configuration as described in the paragraphs below. To make
changes to any Serial parameter, simply set the parameter to the desired
selection and press the “Esc” key.
Figure 4.18 Serial Screen